![]() ![]() If the opener/receiver has dip switch technology, please move to the alternate instructions listed on our website at this time: STEP 3 - PROGRAMMING TO ONE OR MORE OPENERS The keypad is now ready to be programmed.(tone will sound) - then release (green LED will flash and go out). Press both the PROGRAM & UP/DOWN keys at the same time and hold for 5 seconds.Remove activation tab from inside battery compartment.Perform this task first before setting the PIN or at anytime the keypad needs to be reset to its factory default: In some cases, this button could also be on an external receiver that is mounted on or nearby the product. For commercial openers, this button may be on the circuit board or the opener. For garage door openers, be sure to check under the light covers. Find the LEARN/PROGRAM button on the device - shape, color or name of this button could vary by brand.Locate the brand and opener/receiver specifications for the device by consulting the label on the opener/receiver, the instructions manual, the current remote controls for the opener, or the original manufacturer or the opener/receiver.STEP 1 - FIND SPECIFICATIONS & LEARN/PROGRAM BUTTON Do not press the LEARN button for longer than the noted 2-3 seconds as it could cause the operational remotes to no longer work.A temporary PIN can be set for convenient non user access.Keypad will operate up to 3 doors with one PIN number.An audible beep will sound with every key pressed.Genie Universal Keypad Compatibility Chart Genie Universal Wireless Garage Door Opener Keypad Programming Instructions ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |